Blog

ZoneTraderPro Chart Setup and Templates

There is now a webpage under the Support menu that has a link to all the chart templates and VIX files

https://www.zonetraderpro.com/zonetraderpro-chart-setup-and-tempaltes/

Leave a Reply

ZoneTraderPro Chart Setup and Templates

ZoneTraderPro Chart Setup and Templates

To make it a little easier when you lose a workspace or change computers, ZoneTraderPro has created this page to get you back up and running quickly.  Here you will find all the templates and BloodHound VIX files to reconstruct your workspace quickly.

Remember that there are setup videos on the ZoneTraderPro video library page that detail all of the parameneters that you need to know.  The BloodHound indicator is not on the templates.  You will need to add that, if you want it on your chart.  After adding BloodHound indicator to the chart, remember to go back and re-save the template so you have a customized version of it for your use.

Where to Place the Templates

Templates

The templates must be saved in the Documents folder location you see on the right.

You must RIGHT CLICK 

and SAVE AS

Ninja Chart Location

ZTP 3.5 Point ES ZigZag Chart

ZTP 35 Zigzag Chart

The 3.5 ZigZag chart is considered one of the two main decision charts.  The chart template has the following indicators applied.

  1.  ZigZag ZTP for the zones
  2. ZoneTraderProV2BH for the patterns
  3. ZtpDelta Divergence for volume analysis and divergences
  4. ZtpDD_KP2Ratio for the KP2 to be displayed in the lower panel
  5. You will need to add BloodHound

The chart in the pictue is set at 210 ticks.  The chart must have the Tick Replay parameter checked.  The smaller the number, the faster you will have a close of a bar.  You want a faster close of the bar, because this update BloodHound and the KP2 Ratio.  You will find that the information provided gives a more detailed picture than a chart with a higher setting.

On this chart I placed the BloodHound VixV10 which is the VIX trend template.  

Download the template HERE.

35 Spy Chart

The .35 ZigZag chart is considered the second main decision chart.  The chart template has the following indicators applied.

  1.  ZigZag ZTP for the zones
  2. ZoneTrader $VIX  (ZoneTraderVix9D to be released shortly)
  3. ZtpDelta Divergence for volume analysis and divergences
  4. ZtpDD_KP2Ratio for the KP2 to be displayed in the lower panel
  5. You will need to add BloodHound

The chart in the pictue is set at 35 ticks.  The chart must have the Tick Replay parameter checked.  This chart has the VIX9D indicator on it which will be released in the very near term.  The SPY is used as a provy for the ES, because it provides more divergence signals.

On this chart I placed the BloodHound VixTrigger which is the VIX trigger template because it will give a BloodHound indication faster than the trend. 

Before this chart can be created, you must follow the step by step instructions to add the necessary instruments.  That page is found here. 

Download the template HERE.

ZTP 7.5 Point ES ZigZag Chart

7.5 ES ZigZag Chart

The 7.5 ZigZag chart is considered the overview chart.  This chart template has the following indicators applied.

  1.  ZigZag ZTP for the zones
  2. ZtpDelta Divergence for volume analysis and divergences
  3. ZtpDD_KP2Ratio for the KP2 to be displayed in the lower panel
  4. ZtpCumulativeDelta set to filter trades of 100 or more
  5. ZtpDeltaStrenght set to filter trades of 100 or more
  6. You will need to add BloodHound
  7. Optionally you can purchase a subscrtion from SpotGamma to display critical levels in support and resistance based on the option positioning

The chart in the pictue is set at 7.5 points for the ZigZag.  The chart must have the Tick Replay parameter checked. It has the SpotGamma support and resistance levels.  This combined with Delta Strenght can show when options positions are being open or closed at critical levels.

There is no reason to place BloodHound here, as it would only put more stress on you computer.  

Download the template HERE.

ZTP VIX Chart

ZTP VIX Chart

The ZTP VIX chart is looking at all 3 VIX indexes.  The VIX9D must be added first, then the VIX data series, Then the VVIX data series, all set to 3 seconds.  The chart must have the Tick Replay parameter checked for all 3 data series.

This chart template has the following indicators applied.

  1.  ZigZag ZTP for the zones on all data series
  2. ZtpDelta Divergence for the size of the move on each data series
  3. You will need to add BloodHound

 

On this chart I placed the BloodHound VixTrigger which is the VIX trigger template because it will give a BloodHound indication faster than the trend.  I did this to draw my attention quicker to the VIX.  Because 0DTE normally make up around 50% of the total volume traded, VIX9D is on top, and is theoretically more sensitive as these options are opened and closed as day trades, but are very sensitive to ES price change, thus requiring additional options dealers hedging.

A specialized indicator for this chart is in the process of being created.  It will replace the divergence indicators.  When it is available, it will be announced in he BLOG and the template will be made available. (3/27/23)

Download the template HERE.

ZTP Order Flow Chart

order flow settings

The ZTP Order Flow chart is set to a 7 range volumetric bar.  The chart must have the Tick Replay parameter checked.  The range can be adjusted higher or lower as you desire.  The higher the range, the longer you will wait for a valid signal.  The smaller the range, that will mean less volume has been analyzed.

This chart template has the following indicators applied.

  1.  ZoneTraderProFlow Order Flow
  2. ZtpDelta Strenght with no filter
  3. OrderFlow VWAP

 

On this chart I placed the Delta Strenght filter at 0 because there has been less liquidity. 

If you want sound alerts for this, or any template, they are available from this blog post and you can make your own HERE

Download the template HERE.

$ADD Chart

$ADD Chart

The $ADD is an additional chart to measure market metrics.  Tick replay is not needed.

It is using the ZtpV9 BloodHound trend template.

This chart template has the following indicators applied.

  1.  ZoneTraderProV2BH to show tick values only.  Zigzag ticks = 1500
  2. Zigzag_ztp set at 20 deviation points 
  3. You will need to add BloodHound
  4. ZonTrader$TICK
  5. ZonTrader$VIX
  6. ZonTrader$VIX9D (not released yet)

 

Download the template HERE.

VIX Files

Installation

If you are an existing ZoneTraderPro customer and are upgrading to the BloodHound version, I will send you the files in Skype.  This file is a license checker which is installed using the NinjaTrader Control Panel.  

Before these templates can be used, you must follow the step by step instructions to add the necessary instruments.  That page is found here. 

Download the VIX Files

NOTE:  The most current Live Vix file was updated 2/28/2023.  It is now Version 10. This version only has the 2 newest templates. To download only the latest live Vix template Right Click and Save AS 

PREVIOUS VERSON

To download only the previous live Vix template, version 9, download this file.  Right Click and Save AS

bhlocation
import

The files are the SharkIndicators BloodHound template files.  

The picture on the right shows that path.

BloodHound Location